XK10 - IoT Starter Kit 1

Overview

The XK10 IoT Starter Kit consist of the following:

• 1 x AH01 - SHA-256 Hardware Encryption 
• 1 x CW01 - WiFi Core
• 1 x IP01 - USB Programming Interface
• 1 x MD01 - Blank xChip
• 1 x OC03 - Relay Out
• 1 x SL06 - Gesture Sensor
• 1 x XC10 - 10-Pack xBUS Connectors

Description: 

AH01 - SHA-256 Hardware Encryption

This xCHIPis a core encryption module which forms part of the Crypto module range, running a security algorithm based on SHA-256.

This xCHIP includes the ATECC508A from Atmel, which is a secure Crypto Authentication device, which is equipped with an EEPROM array that can be used for storing of up to 16 key, certificates, consumption logging, security configurations and other types of secure data. Access to the various sections of memory can be restricted in several different ways and then the configuration can be locked permanently, to prevent changes.

The ATECC508A features a wide array of defense mechanisms specifically designed to prevent physical attacks on the device itself, or logical attacks on the data transmitted between the device and the system. Hardware restrictions on the ways in which keys are used or generated provide further defense against certain styles of attack.

Access to the device is made through a standard I²C interface at speeds of up to 1 Mb/s.

CW01 - WiFi Core

This xCHIP forms part of the core modules and is equipped with Wi-Fi. The Wi-Fi module offers internet connectivity which allows the user to store data on the cloud which enables remote data access and opens up for the world of IoT.

IP01 - USB Programming Interface

This xCHIP is an interface module which is equipped to power and program other modules via a USB A connector. The USB A connection is required for programming the range of CPU Core xCHIPS over the USB-serial bridge provided by the FT232R.

MD01 - Blank

This xCHIP is used as a placeholder for mechanical strength and xBUS redundancy. This blank xCHIP or dummy xCHIP also contains a QR code point to this store.

OC03 - Relay Out

OC03 is a low-voltage control relay module able to switch AC and DC loads.

The optically isolated relay is controlled by a PCA9554A IO expander, which provides an control interface to the switch. The PCA9554A has several selectable I²C addresses accessible via solder pads.

The TLP241A photorelay consist of a photo MOSFET optically coupled to an infrared light emitting diode which switches a AC or DC load. It provides an isolation voltage of 5000 Vrms, making it suitable for applications that require reinforced circuit insulation.

SL06 - Gesture Sensor

This xCHIP features advanced Gesture detection, Proximity detection, Digital Ambient Light Sense (ALS) and Color Sense (RGBC).

XC10 - 10-Pack xBUS Connectors

The xBUS is the main connection between the xCHIPs. Most xCHIPs will have a connection on all 4 sides, but some will have a connection sacrifices either for space or for other connectors, such as USB or antenna connectors.