XK04 - STEM Micro:Bit Kit

by XinaBox
Save 9%
$142.65 USD
$129.95 USD


5-10 Days Worldwide Delivery


Overview

The STEM Micro:Bit Kit consists of the following:

  • 1 x BM01 - Micro:Bit Bridge
  • 1 x OC05 - Servo Driver
  • 1 x OD01 - OLED Display 128x64
  • 1 x PB04 - Dual AA Intelligent Battery Power Supply
  • 1 x SL01 - UVA, UVB, Light Sensor
  • 1 x SW01 - Advanced Weather Sensor
  • 1 x XC10 - 10-Pack xBUS Connectors

Descriptions:

BM01 - Micro:Bit Bridge

This xCHIP is designed to interface with the Micro:Bit single board computer. This provides an interface to support the xCHIP ecosystem, adding support for many additional sensors etc.

OC05 - Servo Driver

The OC05 xCHIP is a servo motor controller driver that uses the PCA9685 PWM controller as servo interface supported by a BU33SD5 regulator to drive and accurately control up to 8 servo motors on a single module and act as system power supply. The module has 8 standard 2.54 mm (0.1") servo headers, plus 1 standard 2.54 mm (0.1") battery/BEC input header.

OD01 - OLED Display 128x64

This xCHIP forms part of the output modules and is equipped with an OLED display unit that is capable of displaying any graphics or text. Very useful as a sensor data display.

PB04 - Dual AA Intelligent Battery Power Supply

This xCHIP module houses 2 AA batteries to supply power to other connected xCHIP. The PB04 makes use of the INA199A2 current sensor and MAX11647 Analog to Digital Converter. These two low-cost precision sensors allows for accurately measuring power usage, battery voltage and current draw.

The PB04 features an AAT1217 which is a high efficiency, synchronous, fixed frequency, step-up converter designed for battery-powered applications. The high 1.2 MHz switching frequency and completely integrated control circuitry maintains excellent regulation, ripple, and transient response throughout the full load range.

Light load mode operation and low quiescent current allow the AAT1217 to maintain high efficiency performance for light load conditions. With a 1.2A peak inductor current limit, the AAT1217 is capable of delivering 400mA from dual AA cells batteries.

SL01 - UVA, UVB, Light Sensor

This xCHIP forms part of the sensor modules and is equipped with a light sensor that is capable of measuring the luminosity (Wide Dynamic Range — 3 lux to 220k lux) (visual brightness), UVA and UVB radiation. The light sensor converts solar UV light intensity to digital data and has displayed reliable performance of UV radiation measurement inner long time solar UV exposure.

SW01 - Advanced Weather Sensor

This weather sensor xCHIP is equipped with a weather sensor that is capable of measuring the temperature, humidity and atmospheric pressure.

The humidity sensor provides an extremely fast responce time for fast context awareness application and high overall accuracy over a wide temperature range.

The pressure sensor is an absolute barometric pressure sensor with extremely high accuracy and resolution.

The integrated temperature sensor has been optimized for lowest noise and highest resolution. Its output is used for temperature compensation of the pressure and humidity sensors and can also be used for estimation of the ambient temperature.

XC10 - 10-Pack xBUS Connectors

NOT INCLUDED

The Micro:Bit is not included