Getting Started with xChip Core CC01 (Arduino Pro/Pro Mini) in Arduino IDE

Getting Started with xChip Core CC01 (Arduino Pro/Pro Mini) in Arduino IDE

Here's some tips on getting started with our xChip CC01 - Arduino Pro/Pro Mini (ATmega328P) in Arduino IDE.

Which Board to Select from Tool Menu

  1. Install Arduino-AVR Core
  2. Select Board -> Arduino Pro or Pro Mini
  3. COM Port (if not found go to Device Programming)

Device Programming

  1. Compatible Programmers
  1. If IP01 or IP02 is not detected, install the required FTDI Drivers

Featured Projects

  1. Atmospheric Pressure Measurement Using XinaBox xChips
  2. Easy Peasy Temperature Monitor
  3. Servo Control with Capacitive Touch Using XinaBox
  4. More

External Links

Datasheets

Shop

GitHub

Previous article xChips from XinaBox Launched in Space
Next article Getting Started with xChip Core CC03 (Cortex M0+ Core) in Arduino IDE

Leave a comment

Comments must be approved before appearing

* Required fields