Getting Started with xChip Core CC03 (Cortex M0+ Core) in Arduino IDE

Here's some tips on getting started with our xChip CC03 - Cortex M0+ Core (ATSAMD21G18) in Arduino IDE.

Which Board to Select from Tool Menu

1. Install Arduino-SAMD Core
2. Select Board -> Arduino/Genuino Zero(Native USB port)
3. COM Port (if not found go to Device Programming)

Device Programming

1. Compatible Programmers

• IP02
• IP03

2. If IP02 is not detected install the required FTDI Drivers

Featured Samples

1. Sample Dewpoint Serial
2. Sample Lux Serial
3. Sample SW10 Serial

Featured Projects

1. GPS OLED Position Display Using XinaBox
2. OLED Name Tag using XinaBox and Arduino

External Links

Datasheets

• ATSAMD21G18 From Microchip Technology Inc.

Shop

• Buy CC03

GitHub

• CC03 on GitHub